|
|
PROFESSIONAL STUDIO HIGH QUALITY FM BROADCAST TRANSMITTER 120 W POWER
Electronic
protections: in event of over voltage (O.V.P.) or transmitting
frequency error (LOCK) or mismatching (VSWR) or over temperature
(TEMP) the power output is automatically reduced to keep your station
on the air. Every alarm event is displayed by front panel LEDs. Digital
stereo coder. High performances built-in digital stereo coder
(/S option) with stereo separation (> 65 dB) and
signal/noise ratio (> 80 dB) for a top sound quality.
Order PM-120 price: call Stereo
KE-20S PROFESSIONAL FM BROADCAST TRANSMITTER FOR 88-108 MHz NEW MODEL
Click to see this unit inside: photo1 and photo 2 Model: KE-20 S This is a highly Professional stereo broadcast transmitter
for 88 MHz -108 MHz. The power output
is 25 W / 50 ohms adjustable. Fully synthesized
from 88 MHz- 108 MHz this unit was built with a special audio limiter
and filters for the best performances. This is the one of the best broadcast
transmitters on the market! You can easy change the frequency internally.
This transmitter is broadband and doesn't need any adjusting. Order KE-20 MONO price: $ 1,895.00 US Order KE-20 S price: $ 2,395.00 US FM AMPLIFIER 120 W FOR 88 MHz- 108 MHz
Model KNS 120 This amplifier is the best seller unit since FCC increased maximum allowed power for LPFM stations. It is fully protected and needs 10 W input for the maximum power 120 W. With our exciter PM 20 power output is adjustable from 0 - 120 W.
Model KF 300 A highest efficiency and most reliable amplifier for
88 MHz- 108 MHz in the world! No maintenance required, just plug
and play. Full 300 W RF Power /50 ohm antenna.
This is a broadband amplifier- no tuning needed, only 10 W input power
for the max. output 320 W. Order KF-300 model price: call DIGITAL ENCODER/DECODER FOR FM BROADCAST
Model TD/16 RD/16 This digital encoder/decoder made a revulation and
a step forward in the aural STL,using the CBD TM digital codification
system, they permit the simultaneous transmission of more high quailty
audio and auxiliary channels through the traditional narrow band STL
already used for analog signals. |
|||||||||||||||||||||||
|
Copyright © 2000-2005, Ve All rights reserved. | ||